Economy-Minded Dust Cab 800 & 1500 Units

Dust Cab Filtration Systems are designed to provide efficient, cost effective control of dry dusts, fumes and smoke generated from sanding, grinding, welding, and other processes. Typically used for light to moderate concentrations of dry contaminates, the Dust Cab collectors are provided with manual bag shaker cleaning to minimize maintenance and reduce replacement filter costs. The Dust Cab unit is a smaller sized collector and a low cost alternative to the self cleaning cartridge dust collector. The Dust Cab 800 can be configured a couple of different ways – as a floor mounted unit or a portable unit utilizing a caster mount. The Dust Cab 800 unit is a self-contained, ready to be powered, compact source capture dust collector. The overall size of the collector is designed to fit under a standard work bench. The Dust Cab 1500 is a larger source capture collector designed for more demanding applications.

Continue scrolling for detailed product information, or request a quotation by clicking the link below.

Request A Quote

DIMENSIONS & SPECIFICATIONS

Unit Type Filter Area HP CFM L x W x H
Dust Cab 800 55 sq. ft. 1 800 25″ x 24″ x 29″
Dust Cab 1500 180 sq. ft. 3 1500 29″ x 33″ x 68″

OPTIONS:



Dust Cab 800 dust collector

Dust Cab 800

  • Direct drive forward curved blower with a 1 HP TEFC motor delivering 800 CFM at 3 inches external static pressure
  • 115/220 volt single phase blower motor
  • Low noise level at 66 dBA
  • Manual foot shaker to manually clean the filter bags
  • Pull out dust drawer with a holding capacity of 0.9 cubic feet
  • Standard 4 inch inlet collar which is mounted on the rear of the unit
  • Bubble gasket seal on blower and filter access doors
  • 22 envelope pocket, flame retardant cotton sateen filters
  • Total filter area is 55 square feet with tool-less filter replacement
  • Built-in sound attenuator
  • 16 ga metal construction with a heavy duty texture powder coat finish


Dust Cab 1500 dust collector

Dust Cab 1500

  • Direct drive forward curved blower with a 3 HP TEFC motor delivering 1500 CFM at 3 inches external static pressure
  • Low noise level at 74 dBA
  • Manual foot shaker to manually clean the filter bags
  • 3″ deep pull out dust drawer
  • Standard 8-inch inlet collar which is mounted on the rear of the unit
  • Bubble gasket seal on blower and filter access doors
  • 24 envelope pocket, flame retardant cotton sateen filters
  • Total filter area is 180 square feet
  • Built-in sound attenuator
  • 16 ga metal construction with a heavy duty textured powder coat