Centrifugal Mist Collectors

Mist and smoke is generated during manufacturing operations from a variety of sources. Our mist collectors eliminate, trap and recover those contaminants at the source. Designed to work on a variety of equipment using either petroleum based or synthetic coolants, centrifugal mist collectors are compact, efficient and economical.
CM-500 Centrifugal mist collector

Centrifugal mist collector

  • Filters coolant mist, smoke, gas, and vapor
  • Four stages of filtration
  • Manufactured out of 16 ga. spun steel, powder coated
  • Quiet operation: 70 to 76 dBA @ 3’
  • Small and compact with direct mount capability

Mist collector drawing
DIMENSIONS & SPECIFICATIONS
Model Nominal Airflow Motor HP Dimensions (in inches) Sound Level
A B C D E F G
CM-100 100
CFM
0.5 HP 14.9 11.5 11.5 19.4 11.5 3.9 14.5 70 dBA
CM-200 200 CFM 0.5 HP 14.9 11.5 11.5 19.4 11.5 3.9 14.5 70 dBA
CM-300 300 CFM 1 HP 17.1 11.5 12.3 21.4 11.5 3.9 14.5 72 dBA
CM-500 500 CFM 1 HP 17.1 11.5 12.3 21.4 11.5 5.9 14.5 72 dBA
CM-700 700
CFM
3 HP 20.8 11.5 12.3 23.2 11.5 5.9 18.3 74
dBA
CM-900 900
CFM
3 HP 20.8 11.5 12.3 23.2 11.5 5.9 18.3 74
dBA
CM-1200 1200
CFM
3 HP 20.8 11.5 12.3 23.2 11.5 5.9 18.3 76
dBA

Shown below is a CM-500 mist collector with add-on pre-filter and 24″ x 12″ HEPA module.

CM-500 centrifugal mist collector with HEPA filter

6 and 8 foot pedestals are available

Floor mount pedestals Mist collector on CNC


The centrifugal mist collector is typically used on applications generating airborne coolant mist, smoke, gas, and vapor.